Control connection should not be used except for those with advanced flight and the connection should be left blank (manufacturer’s recommendation). With this mode, the flight takes place completely automatically. It provides automatic home return with the determined gas (Speed) ratio. Return-to-Home mode: three-stage switch, in low position. Lock mode can realize 4 kinds of flight modes, such as fixed altitude directional flight, non-fixed altitude non-directional flight, directional variable altitude flight, and balance mode.ģ. So when we do not command via the control, the flight continues in lock mode. When the joystick returns to the midpoint, the flight controller automatically locks the direction or altitude mode, when it exceeds the midpoint, it switches to balance mode. Lock mode (on version 2.0): Three-stage switch in middle position. The plane corrects itself when the joystick is released.Ģ. The aircraft is responsible for the position depending on the location. Balance mode: Three-stage switch, in high position. The up and down movements with the Aileron bar enable navigation in the menu. Entry takes place when the remote control’s Aileron stick is held to the lower-right side for 5 seconds. To access this screen, the FPV screen and Camera must be running. OSD (On Screen Display) allows us to see flight data such as altitude, speed, distance, battery voltage, current in real time on the FPV screen. Since OSD support is available, it has Camera input and FPV Transmitter Output. Gyro Module, M8N GPS and XT60 Galvonometer (Current and Voltage meter). It is also a useful system for FPV aircraft thanks to its OSD feature.į2S Flight Controller consists of 3 parts. F2S is an flight control system with GPS support. There are various gyro and auto pilot systems used in model aircraft.
0 Comments
Leave a Reply. |